Comtrol ROCKETLINX ES8509-XT User Manual page 144

Industrial managed switch
Hide thumbs Also See for ROCKETLINX ES8509-XT:
Table of Contents

Advertisement

Configuration Using the Command Line Interface (CLI)
IP Configuration
IP Address/Mask
(192.168.250.250,
255.255.255.0
The enabled bit of the
subnet mask is used to
represent the number
displayed in the web user
interface. For example,
8 represents: 255.0.0.0,
16 represents: 255.255.0.0, 
24
represents:255.255.255.0.
Gateway
Remove Gateway
Display
Time Setting
NTP Server
Time Zone
IEEE 1588
144 - Basic Settings (CLI)
Switch(config)# int vlan 1
Switch(config-if)# ip
address
dhcp
Switch(config-if)# ip address 192.168.250.8/24
Switch(config-if)# ip dhcp client
Switch(config-if)# ip dhcp client renew
Switch(config-if)# ipv6 address ; IPv6 configuration
X:X::X:X/M
IPv6 address (e.g. 3ffe:506::1/48)
Switch(config-if)# ipv6 address 3ffe:506::1/48
Switch(config)# ip route 0.0.0.0/0 192.168.250.254/24
Switch(config)# no ip route 0.0.0.0/0 192.168.250.254/24
Switch# show running-config
.........
!
interface vlan1
ip address 192.168.250.8/24
no shutdown
!
ip route 0.0.0.0/0 192.168.250.254/24
!
Switch(config)# ntp peer
enable
disable
primary
secondary
Switch(config)# ntp peer primary
IPADDR
Switch(config)# ntp peer primary 192.168.250.250
Switch(config)# clock timezone 26
Sun Jan
1 04:13:24 2006 (GMT) Greenwich Mean Time:
Dublin, Edinburgh, Lisbon, London
Note: By typing clock timezone?, you can see the timezone list. Then choose the
number of the timezone you want to select.
Switch(config)# ptpd run
<cr>
preferred-clock
slave
Preferred Clock
Run as slave
RocketLinx ES8509-XT User Guide: 2000557 Rev. D

Advertisement

Table of Contents
loading

Table of Contents