User Exec Mode; Accessing The Options For A Command - Comtrol ROCKETLINX ES8509-XT User Manual

Industrial managed switch
Hide thumbs Also See for ROCKETLINX ES8509-XT:
Table of Contents

Advertisement

User EXEC Mode

When you login to the ES8509-XT with the CLI, you are in User EXEC mode.
In User EXEC mode, you
can ping, telnet to a remote
device, and show some basic
information.
Type the command and
press Enter:
enable to access
Privileged EXEC mode
(Privileged EXEC Mode
on Page 137).
exit to logout.
? to see the command
list.
list to review the User EXEC mode commands and corresponding options.
For the complete list of commands with options, refer to

Accessing the Options for a Command

The following example illustrates how to view the description and options for a command. This example
illustrates the show command and the firmware version displayed may not reflect your firmware version.
Note: The ? does not appear on the screen.
1. If you type show? (without a space between show and the ?; do not press the Enter key) the ES8509-XT
provides a basic description of that command.
Switch login: admin
Password:
Switch
switch> show
show
Note: The firmware version may not reflect your RocketLinx.
2. If you type show ? (with a space between show and the ?; do not press the Enter key) the ES8509-XT
provides information about the options for that command.
Switch> show
arp
gvrp
ip
version
3. Type show ip ? (with a space between show and the ?, do not press the Enter key) to review the options for
ip.
Switch> show ip
forwarding
route
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Switch>
enable
exit
list
ping
quit
show
telnet
traceroute
(version 2.7 -20130314 - 15:23:41)
Show running system information
ARP table
GARP VLAN Registration Protocol
IP information
Displays ISS version
IP forwarding status
IP routing table
Configuration Using the Command Line Interface (CLI)
Turn on privileged mode command
Exit current mode and down to previous mode
Print command list
Send echo messages
Exit current mode and down to previous mode
Show running system information
Open a telnet connection
Trace route to destination
User EXEC Mode
on Page 185.
User EXEC Mode - 135

Advertisement

Table of Contents
loading

Table of Contents