Table of Contents
Advertisement
Configuration Using the Web Interface
Port Status
The Port Status page displays the current port status, including Small Form Factory (SFP) fiber transceiver
with Digital Diagnostic Monitoring (DDM) function that provides real time information of SFP transceiver
and allows you to diagnostic the optical fiber signal received and launched.
Port Status Page
Link
Shows link status; Up means the link is up and Down means that the link is down.
Shows the port state. If the state is enabled it displays Enable. If the port is disabled or
State
shutdown, it displays Disable.
Speed/Duplex
Current working status of the port.
Flow Control
The state of the flow control.
SFP Vendor
Vendor name of the SFP transceiver that is plugged into the SFP port or ports.
Wavelength
The wave length of the SFP transceiver that is plugged into the SFP port or ports.
Distance
The distance of the SFP transceiver that is plugged into the SFP port or ports.
You can choose from these options:
SFP Scan/
•
Scan: Scan the SFP transceiver and display the information.
Eject
•
Eject: Eject the SFP transceiver that you have selected. You can eject one port or eject
all by click the Eject All button.
SFP DDM
When you select, enable, this scans a SFP DDM transceiver and displays the information.
Displays the current temperature detected and acceptable temperature range for the
Temperature
DDM SFP transceiver.
Tx Power
Displays the current transmit power detected and acceptable Tx power range for the
(dBm)
DDM SFP transceiver.
Rx Power
Displays the current received power and acceptable Rx power range for the DDM SFP
(dBm)
transceiver.
Scan All
Click the Scan All button to scan for all SFPs.
You can eject one or all of the DDM SFP transceivers. To eject all of the SFPs, click Eject
Eject All
All.
Note: Most of the SFP transceivers provide vendor information that allows the ES8509-XT to read it. The web
interface can display vendor name, wave length, and distance of all Comtrol SFP transceiver models. If
you see Unknown info, it may mean that the vendor does not provide their information or that the
information of their transceiver cannot be read. If the plugged DDM SFP transceiver is not certified by
Comtrol, the DDM function is not supported, but the communication is not disabled.
68 - Port Status
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Advertisement
Table of Contents
