Table of Contents
Advertisement
5. Click Next to configure the shortcuts.
6. Click Install.
7. Depending on the operating system, you may need to click Yes to
the Do you want to allow the following program to install software
on this computer? query.
8. Click Launch PortVision DX and Finish in the last installation
screen.
9. Depending on the operating system, you may need to click Yes to
the Do you want to allow the following program to make changes
to this computer? query.
10. Go the next subsection to use PortVision DX to program the
network information.
Configuring the Network Settings
The ES8509-XT has the following default values when shipped from the factory:
•
IP address: 192.168.250.250
•
Subnet mask: 255.255.255.0
•
Gateway address: 192.168.250.1
Use the following procedure to change the default network settings on the ES8509-XT for your network.
1. If necessary, start PortVision DX using the PortVision DX desktop shortcut or from the Start button, click
All Programs > Comtrol > PortVision DX > PortVision DX.
Note: Depending on your operating system, you may need to click Yes to the Do you want to allow the
following program to make changes to this computer? query.
2. Click the Scan button in the Toolbar.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Using PortVision DX
Configuring the Network Settings - 19
Advertisement
Table of Contents
