Table of Contents
Advertisement
5. Type a Host Name to represent the COM port.
6. Click Serial on the left side under Category.
7. Configure the serial line with the following
characteristics.
Serial Settings
Baud Rate
Data bits
Parity
Stop Bit
Flow Control
8. Click Session under Category in the menu.
9. Type an appropriate Saved Session name and click
Save.
10. Click Open.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Value
9600
8
None
1
None
Configuration Using the Command Line Interface (CLI)
Using the Serial Console - 131
Advertisement
Table of Contents
