Table of Contents
Advertisement
Using PortVision DX
There are several ways to configure network information. Comtrol Technical Support recommends connecting
the ES8509-XT to a PC or laptop running
This section shows how to use PortVision DX for initial network configuration and discusses how to:
•
Install PortVision DX
•
Configure the network address
•
Check the firmware and bootloader version on the ES8509-XT to verify that the latest versions are loaded
(Page
22) before configuration
•
Download the latest version firmware and bootloader and upload it to the ES8509-XT
•
Perform other PortVision DX tasks, such as:
-
Adding a new RocketLinx (managed or unmanaged) or a third party device to PortVision DX to
maintain device information on your network
-
Using configuration files for use in configuring multiple installations with the same features
-
Using the LED Tracker
•
Organize how PortVision DX displays your Comtrol Ethernet attached products
•
Access the latest documentation for your Comtrol Ethernet attached product
Optionally, you can use the web user interface or the CLI to perform these tasks on the ES8509-XT using
these subsections:
•
IP Configuration
on Page 48
•
Firmware Upgrade
•
Basic Settings (CLI)
PortVision DX Overview
PortVision DX automatically detects Comtrol Ethernet attached products physically attached to the local
network segment so that you can configure the network address, upload firmware, and manage the following
products:
•
RocketLinx (managed) switches
•
DeviceMaster family
-
DeviceMaster PRO
-
DeviceMaster RTS
-
DeviceMaster Serial Hub
-
DeviceMaster 500
•
DeviceMaster UP
•
DeviceMaster LT
•
IO-Link Master family
In addition to identifying Comtrol Ethernet attached products, you can use PortVision DX to display any
third-party switch and hardware that may be connected directly to those devices. All non-Comtrol products
and unmanaged RocketLinx switches are treated as non-intelligent devices and have limited feature support.
For example, you cannot configure or update firmware on a third-party switch.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Windows
(Page
18)
(Page
19)
(Page
27)
on Page 63
on Page 143
and installing PortVision DX for initial configuration.
(Page
25)
(Page
23)
(Page
26)
(Page
26)
Using PortVision DX - 17
Advertisement
Table of Contents
