Comtrol ROCKETLINX ES8509-XT User Manual page 136

Configuration Using the Command Line Interface (CLI)
4. Type show ip route and press the Enter key to view the IP routing tables for the ES8509-XT.
Switch> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.0.254, vlan1
C>* 127.0.0.0/8 is directly connected, lo
C>* 192.168.0.0/16 is directly connected, vlan1
5. If you type list and press Enter, the ES8509-XT provides you information about all of the commands and
options for a mode. The following example shows the available commands and their options for User
EXEC mode.
Switch> list
enable
exit
list
ping A.B.C.D
ping WORD
ping X:X::X:X [IFNAME]
ping X:X::X:X count CNT [IFNAME]
ping X:X::X:X size <1-1500> [IFNAME]
ping X:X::X:X size <1-1500> count CNT [IFNAME]
quit
show arp
show gvrp statistics [IFNAME]
show ip forwarding
show ip route
show ip route A.B.C.D
show ip route A.B.C.D/M
show ip route supernets-only
show version
telnet WORD
telnet WORD PORT
traceroute WORD
136 - Accessing the Options for a Command RocketLinx ES8509-XT User Guide: 2000557 Rev. D