Comtrol ROCKETLINX ES8509-XT User Manual page 154

Configuration Using the Command Line Interface (CLI)
MSTP (cont.)
Switch(config-mst)# show current
Current MST configuration
Name
Revision
Instance
--------
Display Current
MST
0
Configuration
1
2
------------------------------------------------
Config HMAC-MD5 Digest:
0xB41829F9030A054FB74EF7A8587FF58D
------------------------------------------------
Switch(config-mst)# no
name
Remove Region
revision
Name
instance
Switch(config-mst)# no name
Switch(config-mst)# no instance
Remove
Instance
<1-15>
example
Switch(config-mst)# no instance 2
Switch(config-mst)# show pending
Pending MST configuration
Name
Revision
Instance
Show Pending
--------
MST
0
Configuration
1
------------------------------------------------
Config HMAC-MD5 Digest:
0x3AB68794D602FDF43B21C0B37AC3BCA8
------------------------------------------------
Apply the
Switch(config-mst)# quit
setting and go to
apply all mst configuration changes
the
Switch(config)#
configuration
mode
Switch(config-mst)# end
Apply the
setting and go to
apply all mst configuration changes
the global mode
Switch#
154 - Network Redundancy (CLI)
[comtrol]
65535
Vlans Mapped
--------------------------------------
1,4-4094
2
3
name configure
revision configure
the mst instance
target instance number
[] (->The name is removed by no name)
65535
Vlans Mapped
--------------------------------------
1,3-4094
2 (->Instance 2 is removed by no instance 2)
RocketLinx ES8509-XT User Guide: 2000557 Rev. D