Table of Contents
Advertisement
Time Setting Page (Continued)
Select Auto, Master, or Slave for the PTP mode.
There are two clocks, master and slave. The master device periodically launches an
exchange of messages with slave devices to help each slave clock re-compute the offset
Mode
between its clock and the master's clock.
To enable IEEE 1588, select Enable in the PTP State and choose Auto, Master or Slave
Mode. After the time is synchronized, the system time displays the correct time from
the PTP server.
Click Apply to apply the settings.
Apply
Note: You must Save the settings
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
the ES8509-XT is powered off.
Configuration Using the Web Interface
(Page
127), if you want to maintain these settings if
Time Setting - 51
Advertisement
Table of Contents
