Basic Settings (Cli) - Comtrol ROCKETLINX ES8509-XT User Manual

Basic Settings (CLI)

The Basic Setting group provides you with the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
Optionally, you can use the web user interface for configuration, see
This table provides detailed information about the CLI commands for basic settings.
Switch Setting
System Name
System Location
System Contact
Display
Admin Password
User Name and Password
Display
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Switch(config)# hostname
DWORD Network name of this system
Switch(config)# hostname ES8509-XT
Switch(config)#
Switch(config)# snmp-server location Minnesota
Switch(config)# snmp-server contact support@comtrol.com
Switch# show snmp-server name
ES8509-XT
Switch# show snmp-server location
Minnesota
Switch# show snmp-server contact
support@comtrol.com
Switch> show version
Hardware Information :
Product Name : ES8509-XT
Serial Number : 206500008
MAC Address : 00C04E350007
Manufacturing Date : 2011/05/03
Software Information :
Loader Version : 1.3.1.4
Firmware Version : 1.1-20110412-17:08:02
Switch# show hardware mac
MAC Address: 00C04E350001
Switch(config)# administrator
NAME Administrator account name
Switch(config)# administrator admin
PASSWORD Administrator account password
Switch(config)# administrator admin admin
Change administrator account admin and password admin
success.
Switch# show administrator
Administrator account information
name: admin
password: admin
Configuration Using the Command Line Interface (CLI)
Basic Settings on Page 45.
Basic Settings (CLI) - 143