Security (Cli) - Comtrol ROCKETLINX ES8509-XT User Manual

Configuration Using the Command Line Interface (CLI)

Security (CLI)

The ES8509-XT provides several security features for you to secure your connection.
Optionally, you can use the web user interface for configuration, see
This table provides information about the command lines for security configuration.
Port Security
Switch(config)# mac-address-table static 00c0.4e35.0101 vlan 1
Add MAC
interface gi1
mac-address-table unicast static set ok!
Switch(config)# interface gi1
Switch(config-if)# switchport port-security
Port Security Disables new MAC addresses learning and aging activities!
Rule: Add the static MAC, VLAN and Port binding first, then enable the port security
to stop new MAC learning.
Switch(config-if)# no switchport port-security
Disable Port
Security
Enable new MAC addresses learning and aging activities!
Switch# show mac-address-table static
Destination Address
Display
-------------------
00c0.4e35.0101
IP Security
Switch(config)# ip security
Set ip security enable ok.
IP Security
Switch(config)# ip security host 192.168.250.33
Add ip security host 192.168.250.33 ok.
Switch# show ip security
ip security is enabled
Display
ip security host:
192.168.250.33
176 - Security (CLI)
Security
Address Type Vlan
--------------- -------
Static 1
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
on Page 107.
Destination Port
-----------------
gi1