Comtrol ROCKETLINX ES8509-XT User Manual page 159

Redundant Ring
Switch(config)# redundant-ring 1
Ring 1 created
Create or
configure a Ring Switch(config-redundant-ring)#
Note: 1 is the target Ring ID which is going to be created or configured.
Switch(config-redundant-ring)# version
default
rapid-super-ring
Super Ring
Version
super-ring
Switch(config-redundant-ring)# version rapid-super-ring
Switch(config-redundant-ring)# priority
<0-255>
Priority
default
Switch(config-redundant-ring)# super-ring priority 100
Switch(config-redundant-ring)# port
IFLIST
Ring Port
cost
Switch(config-redundant-ring)# port gi1,gi2
Ring Info
Switch# show redundant-ring [Ring ID]
[Ring1] Ring1
Current Status : Disabled
Role
Ring Status
Ring Manager
Blocking Port : N/A
Giga Copper
Configuration :
Version
Priority
Ring Info
Ring Port
Path Cost
Dual-Homing II : Disabled
Statistics :
Watchdog
Link Up
Link Down sent
Role Transition count 0
Ring State Transition count 1
Ring ID is optional. If the ring ID is typed, this command only
displays the information of the target Ring.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
set default to Redundant ring
rapid super ring
super ring
valid range is 0 to 255
set default
Interface list, ex: gi1,gi3-5
path cost
: Disabled
: Abnormal
: 0000.0000.0000
: N/A
: Super Ring
: 128
: gi1, gi2
: 100, 200
sent 0, received
sent 0, received
0, received
Configuration Using the Command Line Interface (CLI)
0, missed
0
0
Network Redundancy (CLI) - 159
0