Monitor And Diag (Cli) - Comtrol ROCKETLINX ES8509-XT User Manual

Monitor and Diag (CLI)

The ES8509-XT provides several types of features for you to monitor the status of the switch or diagnostic for
you to check the problem when encountering problems related to the switch. The features include MAC
Address Table, Port Statistics, Port Mirror, Event Log, and Ping.
Optionally, you can use the web user interface for configuration, see
This table provides detailed information about command lines of the Monitor and Diag configuration.
MAC Address Table
Switch(config)# mac-address-table aging-time 350
mac-address-table aging-time set ok!
Aging Time
Note: The default aging timeout value is 300.
Switch(config)# mac-address-table static 00c0.4e35.0101 vlan 1
Add Static
interface gi5
Unicast MAC
mac-address-table ucast static set ok!
address
Rule: mac-address-table static MAC_address VLAN VID interface interface_name
Switch(config)# mac-address-table multicast 00c0.4e35.0101 vlan 1
interface gi3-4
Add Multicast
Adds an entry in the multicast table ok!
MAC address
Rule: mac-address-table multicast MAC_address VLAN VID interface_list
interface_name/range
Switch# show mac-address-table
***** UNICAST MAC ADDRESS *****
Destination Address
-------------------
00c0.4e35.ca3b
00c0.4e35.0386
Show MAC
Address Table
00c0.4e35.0101
– All types
00c0.4e35.0102
00c0.4e35.0100
***** MULTICAST MAC ADDRESS *****
Vlan
----
1
1
Switch# show mac-address-table dynamic
Show MAC
Destination Address
Address Table
– Dynamic
-------------------
Learnt MAC
00c0.4e35.ca3b
addresses
00c0.4e35.0386
Switch# show mac-address-table multicast
Show MAC
Vlan
Address Table
----
– Multicast
1
MAC addresses
1
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Address Type
--------------- -------
Dynamic
Dynamic
Static
Static
Management
Mac Address COS
--------------- ----
00c0.4e35.0800
00c0.4e35.fffa
Address Type
--------------- -------
Dynamic
Dynamic
Mac Address COS
--------------- ----
00c0.4e35.0800
00c0.4e35.fffa
Configuration Using the Command Line Interface (CLI)
Monitor and Diag
Vlan
1
1
1
1
1
Status Ports
------- --------------------------
0 gi6
0 gi4,gi6
Vlan
1
1
Status Ports
------- --------------------------
0 gi5-6
0 gi3,gi5-6
on Page 119.
Destination Port
-------------------
gi1
gi2
gi3
gi3
Destination Port
-------------------
gi4
gi6
Monitor and Diag (CLI) - 181