Uploading Firmware To Multiple Es8509-Xt Switches - Comtrol ROCKETLINX ES8509-XT User Manual

Industrial managed switch
Hide thumbs Also See for ROCKETLINX ES8509-XT:
Table of Contents

Advertisement

Using PortVision DX

Uploading Firmware to Multiple ES8509-XT Switches

You can use this procedure if your ES8509-XT is connected to the host PC, laptop, or if the ES8509-XT resides
on the local network segment.
Note: Technical support does not advise uploading bootloader to multiple ES8509-XT switches. Remember
that uploading firmware reboots the ES8509-XT, which depending on your network connections may
cause firmware uploading to fail on another ES8509-XT.
1. If the ES8509-XT is not displayed in PortVision DX, click the Scan button.
2. Select the Comtrol Ethernet attached product type and click the Scan button.
3. Shift-click the multiple ES8509-XT switches on the Main screen that you want to update and right-click
and then click Advanced > Upload Firmware.
4. Browse, click the firmware (.bin) file, Open (Please locate the new firmware), and then click Yes (Upload
Firmware).
It may take a few minutes for the firmware to upload onto all of the ES8509-XT switches. The ES8509-XT
reboots itself during the upload process.
5. Click Ok to the advisory message about waiting to use the device until the status reads ON-LINE.
In the next polling cycle, PortVision DX updates the Device List pane and displays the new firmware version.
24 - Uploading Firmware to Multiple ES8509-XT Switches
RocketLinx ES8509-XT User Guide: 2000557 Rev. D

Advertisement

Table of Contents
loading

Table of Contents