Port Statistics - Comtrol ROCKETLINX ES8509-XT User Manual

Port Statistics

Use this page to view operation statistics for each port. The statistics that can be viewed include Link Type,
Link State, Rx Good, Rx Bad, Rx Abort, Tx Good, Tx Bad and Collisions.
Note: If you see an increase of Bad, Abort or Collision counts, that may mean the network cable is not properly
connected or the network performance of the port is poor. Check your network cable, the network
interface card of the connected device, the network application, or reallocate the network traffic.
The following information provides a view of the current port statistic information.
Port Statistics Page
Type
Link
State
RX Good
RX Bad
RX Abort
TX Good
TX Bad
Collision
Clear Selected
Clear All
Reload
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Indicates the port type.
Indicates the link status; Up or Down.
Indicates the link state; Enable or Disable.
The count of good frames received, which is the total number of
received unicast, broadcast, multicast, and pause frames.
The count of bad frames received, which is the total number of
undersize, fragment, oversize, jabber, receive errors (RxErr), and
frame check sequence errors (FCSErr) frames.
The count of abort frames received, which is the total number of
discarded and filtered frames.
The count of good frames transmitted, which is the total number of
transmitted unicast, broadcast, multicast and pause frames.
The count of FCSErr frames transmitted.
The count of collision frames, including single, multiple, excessive,
and late collisions frames.
Click to clear selected port counts.
Click to clear all counts.
Click to reload all counts.
Configuration Using the Web Interface
Port Statistics - 123