Warnings (Cli) - Comtrol ROCKETLINX ES8509-XT User Manual

Configuration Using the Command Line Interface (CLI)

Warnings (CLI)

The ES8509-XT provides several types of warning features for you to remotely monitor the status of the
attached devices or changes in your network. The features include Fault Relay, System Log and SMTP Email
Alert.
Optionally, you can use the web user interface for configuration, see
This table provides detailed information about the command lines of the warning configuration.
Fault Relay Output
Relay Output
DI State
Dry Output
Ping Failure
Port Link Failure
Power Failure
Power Failure
Super Ring Failure
178 - Warnings (CLI)
Switch(config)# relay 1
di DI State
dry dry output
ping ping failure
port port link failure
power power failure
ring super ring failure
Switch(config)# relay 1 di
<1 DI number
Switch(config)# relay 1 di 1
high high is abnormal
low low is abnormal
Switch(config)# relay 1 di 1 high
Switch(config)# relay 1 dry
<0-65535> turn on period in second
Switch(config)# relay 1 dry 5
<0-65535> turn off period in second
Switch(config)# relay 1 dry 5 5
Switch(config)# relay 1 ping 192.168.250.33
<cr>
reset reset a device
Switch(config)# relay 1 ping 192.168.250.33 reset
<1-65535> reset time
Switch(config)# relay 1 ping 192.168.250.33 reset 60
<0-65535> hold time to retry
Switch(config)# relay 1 ping 192.168.250.33 reset 60 60
Switch(config)# relay 1 port
PORTLIST port list
Switch(config)# relay 1 port gi1-5
Switch(config)# relay 1 power
<1-2> power id
Switch(config)# relay 1 power 1
Switch(config)# relay 1 power 2
Switch(config)# relay 1 power
<1-2> power id
any Anyone power failure asserts relay
Switch(config)# relay 1 power 1
Switch(config)# relay 1 power 2
Switch(config)# relay 1 ring
Warning on Page 114.
RocketLinx ES8509-XT User Guide: 2000557 Rev. D