3xLogic VX-2S-CPIR-W User Manual page 99

2. Go to the Capture Schedule tab to configure the capture schedule by clicking and dragging the mouse on
the time bar. You can copy the record schedule to other days by clicking the green copy icon on the right
of each time bar.
3. Click Advanced to select a stream type.
4. Click Save to save the settings.
5. Go to the Capture Parameters tab to configure the capture parameters.
a. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
b. Select the picture format, resolution, quality and capture interval of continuous snapshots.
c. Check the Enable Event-triggered Snapshot checkbox to enable event-triggered snapshots.
d. Select the picture format, resolution, quality, capture interval, and capture number of event-triggered
snapshots.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Capture Configuration
Figure 13-3
Advanced Setting of Capture Schedule
Figure 13-4
USER MANUAL| VX-2S-CPIR-W
99