Table of Contents
Advertisement
Day/Night Switch OFF:
Steps:
1.
Draw the detection area as in normal configuration mode. Up to 8 areas are supported.
2.
Select OFF for Switch Day and Night Settings.
3.
Select the area by clicking the area No.
4.
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area.
5.
Set the arming schedule and linkage method as in the normal configuration mode.
6.
Click Save to save the settings.
Day/Night Auto-Switch:
Steps:
1. Draw the detection area as in normal configuration mode. Up to 8 areas are supported.
2. Select Auto-Switch for Switch Day and Night Settings.
3. Select the area by clicking the area No.
4. Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected
area in the daytime.
5. Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected
area at night.
6. Set the arming schedule and linkage method as in the normal configuration mode.
7. Click Save to save the settings.
Day/Night Scheduled-Switch:
Steps:
1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2. Select Scheduled-Switch for Switch Day and Night Settings.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Expert Mode of Motion Detection
Figure 12-5
USER MANUAL| VX-2S-CPIR-W
90
- Quick Links:
- Camera Setup Options
Hide quick links:
Advertisement
Table of Contents
