Non-Dhcp Networks; Wired - 3xLogic VX-2S-CPIR-W User Manual


3xLOGIC All-in-One PC Setup - For this network environment, this tool is most beneficial for larger
deployments where individually scanning each camera with the mobile tool would be cumbersome. See
Section 3.2 3xLOGIC All-in-One PC Setup

2.2 Non-DHCP Networks

WIRED

The 3xLOGIC All-in-One PC Setup software was engineered specifically for use in non-DHCP networks where the
mobile app (required DHCP) cannot be used to configure the camera.
1. REQUIRED - 3xLOGIC All-in-One PC Setup – To utilize this tool in this network environment, the tool must
be installed on a Windows PC which is networked with the cameras. The app then auto-detects the
camera at which point an appropriate IP address can be assigned to the camera to establish external
internet connectivity. The app can then be used to push configuration settings to the selected camera
via the cloud.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
for instructions on setting up the camera with this tool.
USER MANUAL| VX-2S-CPIR-W
12