3xLogic VX-2S-CPIR-W User Manual page 64

For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
Steps:
1. Enter the SNMP Settings interface: Configuration > Network > Advanced Settings > SNMP.
2. Check off Enable SNMPv1, Enable SNMP v2c, Enable SNMPv3 to enable each version,
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
SNMP Settings
Figure 9-9
USER MANUAL| VX-2S-CPIR-W
64