Log; System Service - 3xLogic VX-2S-CPIR-W User Manual

USER MANUAL| VX-2S-CPIR-W

LOG

The operation, alarm, exception and general information processed by the camera can be stored in
log files. You can also export log files on demand.
Before you start:
Please configure network storage for the camera or insert a SD card into the camera.
Steps:
1. Enter log searching interface: Configuration > System > Maintenance > Log.
Log Searching Interface
Figure 8-12
2. Set the log search conditions to narrow down the search, including the Major Type, Minor Type,
Start Time and End Time.
3. Click Search to search log files. The matched log files will be displayed on the log list interface.
Log Searching
Figure 8-13
4. To export log files, click Export.

SYSTEM SERVICE

System Service settings refer to the software and hardware service the camera supports. Supported
functions vary according to the different cameras. Cameras can support IR LED, ABF (Auto Back
Focus), Auto Defog, or Status LED. You can enable or disable the corresponding service according to
the actual need of your surveillance environment.
50
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC