WIRELESS CONNECTION IN AD-HOC MODE
In Ad-hoc mode, there is no need to connect the wireless camera via router and instead, the camera can be
connected to a PC with an active internet connection. The scenario is the same as connecting the camera with a PC
directly using a network cable.
Steps:
1. Choose Ad-hoc mode.
2. Customize a SSID for the camera.
3. Choose the Security Mode of the wireless connection.
4. Enable the wireless connection function for your PC.
5. On the PC side, search the network and you can see the SSID of the camera listed.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Wi-Fi Setting- Ad-hoc
Figure 5-10
Security Mode- Ad-hoc Mode
Figure 5-11
USER MANUAL| VX-2S-CPIR-W
28
Need help?
Do you have a question about the VX-2S-CPIR-W and is the answer not in the manual?
Questions and answers