Adding A Vx-2S-Cpir-W Camera To Vigil Vcm - 3xLogic VX-2S-CPIR-W User Manual

6. If the test is successful, then VIGIL Client can successfully communicate with the Server. Click OK at
the bottom of the Add Server window after configuring all required fields to save the new Server to
VIGIL Client. For more information on configuring VIGIL Servers, please see Section 5.1 of the
Client Users Guide.
NOTE: The camera will be visible in the Client treeview and will be represented by a
camera video stream can be added to the VIGIL Client viewer in the same manner as VIGIL Server
cameras; Simply extend the camera's drop-down menu and double click the icon to add it to the
viewer. Alternatively, a user can drag-and-drop the camera stream icon into the desired frame of the
VIGIL Client viewer.
For more information on configuring VIGIL Servers/V-Series All-in-One camera in VIGIL Client, please see Section
5.1 of the VIGIL Client Users Guide.

ADDING A VX-2S-CPIR-W CAMERA TO VIGIL VCM

Steps:
1. To add a VX-2S-CPIR-W camera to VCM for central management and health-monitoring purposes, launch
a VCM Client.
2. Log into a VCM Server.
3. Click the Health Monitor button.
4. Select (left-click) a Server Group from the Server Groups sidebar to. The VX-2S-CPIR-W camera will be
added to this group.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
: Adding an V-Series Camera to VCM
Figure 4-2
USER MANUAL| VX-2S-CPIR-W
VIGIL
icon. The
19