3xLogic VX-2S-CPIR-W User Manual page 22

Figure 4-6
2. Click the button to open the Settings menu.
3. Select the Servers icon.
4. Click the
form. VISIX V-Series devices are considered edge recording devices, and thus are recognized as their own
VIGIL Server within the VIGIL suite, including 3xCLOUD.
5. Click the By Serial No./Alias tab to configure the Server with a VIGIL Connect alias. If using traditional
network connection criteria is desired, click the By IP Address and Port button enter in an IP and Port info
(if using standard network connection criteria, also ignore step 6 of these instructions) for the device.
6. Enter the VIGIL Connect alias of the desired V-Series camera in the Serial No./Alias field (VIGILTest1 used
in the above example).
7. Fill in all required fields and click Add to save the V-Series camera to your 3xCLOUD VIGIL Server list.
The V-Series camera should now be available to add to your 3xCLOUD layout. If you experience connection issues,
confirm the connection info (IP Address and Port/VIGIL Connect Alias) you entered is correct. If all settings appear
to be correct, contact 3xLOGIC for further instruction or reference
Guide for troubleshooting tips.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Adding an V-Series Camera to a 3xCLOUD Account
button (not pictured above). This will deploy the Add/Edit VIGIL Server
USER MANUAL| VX-2S-CPIR-W
Tech Tip 140028 VIGIL Connect Troubleshoot
22