Table of Contents
Advertisement
b.
Check the Enable checkbox to enable ROI function for the chosen region.
c.
Click Drawing. Click and drag the mouse on the view screen to draw a red rectangle as the
ROI region. You can click Clear to cancel former drawing. Click Stop Drawing when you finish.
d.
Select the ROI level.
e.
Enter a region name for the chosen region.
f.
Click Save the save the settings of ROI settings for chosen fixed region.
g.
Repeat steps (1) to (6) to setup other fixed regions.
5.
Set Dynamic Region for ROI.
a.
Check the checkbox to enable Face Tracking.
NOTE:
To enable face tracking function, the face detection function should be supported and
enabled.
b.
Select the ROI level.
6.
Click Save to save the settings.
NOTE:
ROI level means the image quality enhancing level. The larger the value is, the better the image
quality will be.
10.4 Display Info. on Stream
Check-off Enable Dual-VCA to mark object information (e.g. human, vehicle, etc.) in the video stream.
After enabling, you can set rules on the connected rear-end device to detect the events including line
crossing, intrusion, etc.
10.5 Configuring Target Cropping
You can specify a target area on the live video stream which can be displayed via the third stream,
providing more detail of the target area if needed.
NOTE:
Target cropping function varies according to different camera models.
Steps:
1.
Enter the Target Cropping settings interface.
2.
Check Enable Target Cropping checkbox to enable the function.
3.
Set Third Stream as the stream type.
4.
Select the cropping resolution for the video display of target area. A red rectangle is displayed on
the live video to mark the target area, and you can click-and-drag the rectangle to re-size the
target area as desired.
5.
Click Save to save the settings.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Display Info. on Stream
Figure 10-4
USER MANUAL| VX-2S-CPIR-W
76
- Quick Links:
- Camera Setup Options
Hide quick links:
Advertisement
Table of Contents
