Configuring Ftp Settings - 3xLogic VX-2S-CPIR-W User Manual

respectively. SNMP v3 is generally recommended as it utilizes the latest security protocol.
3. Configure the SNMP settings.
NOTE: The settings of the SNMP software should be the same as the settings you configure here.
4. Click Save to save and finish the settings.
NOTES:
►
A reboot is required for the settings to take effect.
►
To lower the risk of information leakage, it is highly recommended to enable SNMP v3 instead
of SNMP v1 or v2.

CONFIGURING FTP SETTINGS

You can configure the FTP server related information to enable the uploading of captured
pictures/stillshots to an FTP server. The captured pictures can be triggered by events or a timing
snapshot task.
Steps:
1. Enter the FTP Settings interface: Configuration > Network > Advanced Settings > FTP.
2. Input the FTP address and port.
3. Configure FTP settings; A user name and password are required for the FTP server login.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories: upper
case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.
Proper configuration of all passwords and other security settings is the responsibility
of the installer and/or end-user.
4. Set the directory structure and picture filing interval.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
FTP Settings
Figure 9-10
USER MANUAL| VX-2S-CPIR-W
65