Event Settings; Basic Events; Configuring Motion Detection - 3xLogic VX-2S-CPIR-W User Manual

12

Event Settings

This section explains how to configure the network camera to respond to alarm events, including
Basic Events and Smart Events.

12.1 Basic Events

You can configure basic events by following the instructions in this section, including Motion
Detection, Video Tampering, Alarm Input, Alarm Output, and Exception, etc. These events can trigger
the linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.
NOTE: Check the checkbox of Notify Surveillance Center if you want the alarm information to be
pushed to PC or mobile client software as soon as the alarm is triggered.

CONFIGURING MOTION DETECTION

Purpose:
Motion detection detects object movement in the configured surveillance area, and a series of actions
can be taken when the alarm is triggered.
In order to detect the moving objects accurately and reduce the false alarm rate, normal
configuration and expert configuration are selectable for different motion detection environments.
Normal Configuration
Normal configuration adopts the same set of motion detection parameters in the daytime and at
night.
Tasks 1: Set the Motion Detection Area
Steps:
1. Enter the motion detection settings interface: Configuration > Event > Basic Event > Motion
Detection.
2. Check the Enable Motion Detection checkbox.
3. Check the Enable Dynamic Analysis for Motion checkbox if you want to mark the detected objects
with green tracking rectangles.
NOTE: Select Disable for rules if you don't want the detected objected displayed with the green
rectangles. Select disable rules from Configuration > Local Configuration > Live View Parameters-
rules.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
USER MANUAL| VX-2S-CPIR-W
86