3Xlogic All-In-One Pc Setup Tool - Wired Connection Setup - 3xLogic VX-2S-CPIR-W User Manual

2. Press the WPS button on your network access point/router to activate device discovery. See your router
/ access point manufacturer's documentation for additional information on utilizing its WPS
functionality.
3. Press the camera's WPS button (located on the back of the device). The router/access point and your
camera should now establish a wireless connection. The Yellow Link LED indicator on the camera will
begin flashing once the connection is established.
4. Download, install and launch 3xLOGIC All-in-One PC Setup software on a Windows PC with an external
internet connection. The Camera Detection page will deploy.
5. Select the desired camera from the list of detected devices and click Next.
6. Fill in installer info and click Confirm. On the proceeding page, fill in company info and click Continue.
7. A login page will deploy with the camera's serial number automatically entered. You will now be
prompted to enter the camera's login credentials (default username/password: admin/12345). Enter
the credentials and click Continue to login to the device and begin camera configuration. Skip to
3xLOGIC All-In-One PC Setup Tool
3XLOGIC ALL-IN-ONE PC SETUP TOOL – WIRED CONNECTION SETUP
To setup the camera using the 3xLOGIC VSX Setup Tool, follow the below setup:
1. Unbox and install the camera to your network specifications.
2. Connect the camera so it has external internet connectivity. For information on wired network
connections, see
3. Download, install and launch 3xLOGIC All-in-One PC Setup software on a Windows PC with an external
internet connection. The Camera Detection page will deploy.
NOTE: Non-DHCP Environments / Networks Requiring Static IP- If the camera is located on a
network with DHCP disabled, the Windows PC must be on the same network segment as the camera
so it can identify the device.
i. OPTIONAL STEP for Non-DHCP Environments / Networks Requiring Static
connection information can be customized to meet the needs of your network and may be required
to establish external internet connectivity for the camera (required to complete configuration). To
change network connection info, select the desired camera from the list and click IP Setup. A form
will launch where the camera's IP Address, Subnet Mask and Default Gateway can be changed.
Enter the admin password (default: 12345) and click OK to save the new changes.
4. To commence camera setup, select the desired camera from the list and click Next.
5. Fill in installer info and click Confirm. On the proceeding page, fill in company info and click Continue.
6. The camera's serial number will now be entered and you will be prompted to enter the camera's login
credentials (default username/password: admin/12345). Enter the credentials and tap Continue to login
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
– Camera Setup for remaining instructions on camera configuration.
Wiring over LAN.
USER MANUAL| VX-2S-CPIR-W
IP- A camera's network
16