Maintenance; Upgrade & Maintenance - 3xLogic VX-2S-CPIR-W User Manual

Steps:
1. Enter VCA Resource configuration interface: Configuration > System > System Settings > VCA
Resource
2. Select a desired VCA combination. SMART Event + Face Detection and SMART Event + Heat Map
are selectable.
3. Click Save to save the settings. A reboot is required after setting the VCA Resource.
NOTES:
►
VCA Resource function varies according to different camera models.
►
Face Detection and Heat Map are mutually exclusive. When SMART Event + Heat Map is
enabled, Face Detection interface will not be displayed.
►
This function may not be supported by some camera models.

8.3 Maintenance

UPGRADE & MAINTENANCE
The Upgrade & Maintenance interface allows you to process device operations, including reboot,
partial restore, restore to default, export/import of configuration files, and device upgrades.
Enter the Maintenance interface: Configuration > System > Maintenance > Upgrade & Maintenance

Reboot: Restart the device.

Restore: Reset all the parameters, except the IP parameters and User information, to default
settings.

Default: Restore all the parameters to their factory default state.
NOTE: After restoring the default settings, the IP address is also restored to the default IP
address.

Export/Import Config. File: Configuration file is used for the batch configuration of the camera,
which can simplify configuration when multiple cameras require identical configuration.
Steps:
1. Click Device Parameters to export the current configuration file, and save it to a chosen
destination.
2. Click Browse to select the saved configuration file and then click Import to start importing
configuration file.
NOTE: You need to reboot the camera after importing configuration file.

Upgrade: Upgrade the device to a certain version.
Steps:
1. Select firmware or firmware directory to locate the upgrade file.

Firmware: Locate the exact path of the upgrade file.

Firmware Directory: Only the directory the upgrade file belongs to is required.
2. Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade.
NOTE: The upgrade process will take 1 to 10 minutes. Please do not disconnect camera power
during this process. The camera reboots automatically after upgrading.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
USER MANUAL| VX-2S-CPIR-W
49