Easy Wi-Fi Connection With Wps Function - 3xLogic VX-2S-CPIR-W User Manual

All in one multi sensor camera
Hide thumbs Also See for VX-2S-CPIR-W:
Table of Contents

Advertisement

EAP-PEAP:
User Name - Enter the user name to present to the network
Password - Enter the password of the network
PEAP Version - Select the PEAP version used at the access point.
Label - Select the label used by the access point.
EAPOL Version - Select version (1 or 2) depending on the version used at the access point
CA Certificates - Upload a CA certificate to present to the access point for authentication

EASY WI-FI CONNECTION WITH WPS FUNCTION

For basic users, WiFi configuration can be a complicated task. To avoid the complex configuration of a wireless
connection you can enable the WPS function.
WPS (Wi-Fi Protected Setup) refers to the one-touch configuration of an encrypted connection between the device
and the wireless router. WPS makes it easy to add new devices to an existing network without remembering
network names or entering long passphrases. There are two modes of the WPS connection; PBC mode and PIN
mode.
NOTE:
If you enable the WPS function, you do not need to configure parameters such as Encryption Type nor do
you require the networks security passphrase.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
EAP-TLS
Figure 5-16
USER MANUAL| VX-2S-CPIR-W
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents