Https Settings - 3xLogic VX-2S-CPIR-W User Manual

NOTE: To reboot the device via SMS, send the message "reboot" to the device, and the
device will reply a message "reboot success" after rebooting has succeeded.
d. (Optional) You can click Send Test SMS to send a message to the mobile phone for test.
e. Click Save to save the settings.

HTTPS SETTINGS

HTTPS provides authentication of a web site and its associated web server, which protects against
Man-in-the-middle attacks. Perform the following steps to set the port number of https.
E.g., If you set the port number as 443 and the IP address is 192.168.1.64, you may access the device
by inputting https://192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface: Configuration > Network > Advanced Settings > HTTPS.
2. Check-off Enable to enable HTTPS.
3. Create a self-signed certificate or authorized certificate.
Creating a self-signed certificate
a. Select Create Self-signed Certificate as the Installation Method.
b. Click Create button to enter the creation interface.
c. Enter the country, host name/IP, validity and other information.
d. Click OK to save the settings.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
HTTPS Configuration Interface
Figure 9-12
Create Self-signed Certificate
Figure 9-13
USER MANUAL| VX-2S-CPIR-W
69