Security Settings; Authentication; Ip Address Filter - 3xLogic VX-2S-CPIR-W User Manual


ABF: When ABF function is enabled, you can click
auxiliary focus.

Third Stream: For some camera models, you can check off the Enable Third Stream feature
to reboot the system and enable a third stream.

8.4 Security Settings

Configure security parameters, including Authentication, Anonymous Visit, IP Address Filter, and
Security Service from security interface.

AUTHENTICATION

Purpose:
Under Authentication settings, you can secure live view stream data.
Steps:
1. Enter the Authentication interface: Configuration > System > Security > Authentication.
2. Select the RTSP Authentication type (Basic or Disable) in the drop-down list to enable or disable
RTSP authentication.
NOTE: If you disable RTSP authentication, anyone can access the video stream by RTSP protocol
via the camera's IP address.
3. Click Save to save the settings.

IP ADDRESS FILTER

This function makes it possible for IP filtering/ camera access control.
Steps:
1. Enter the IP Address Filter interface: Configuration > System > Security > IP Address Filter
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Enable Third Stream
Figure 8-14
RTSP Authentication
Figure 8-15
USER MANUAL| VX-2S-CPIR-W
on PTZ control panel to utilize
51