Configure System Settings; Configuring Basic Information - 3xLogic VX-2S-CPIR-W User Manual

All in one multi sensor camera
Hide thumbs Also See for VX-2S-CPIR-W:
Table of Contents

Advertisement

when a face is detected it will be marked with a green rectangle on the live view.
Image Format: Choose the image format for picture/stillshot capture.
Record File Settings
Set the destination of recorded video files. Applies only for video recorded manually via the browser
UI.
Record File Size: Select the packed size of the manually recorded and downloaded video
files to 256M, 512M or 1G. After the selection, the maximum record file size is the value
you selected.
Save record files to: Set the destination for manually recorded video files.
Save downloaded files to: Set the destination for files downloaded/exported via playback
mode.
Picture and Clip Settings
Set the destination of captured pictures/stillshots and clipped video files. Valid only for media captured
manually via the web browser UI.
Save snapshots in live view to: Set the destination of the manually captured pictures in live
view mode.
Save snapshots when playback to: Set the destination of the captured pictures in playback
mode.
Save clips to: Set the destination of clipped video files in playback mode.
NOTE:
You can click Browse to change the directory for saving the clips and pictures, and
click Open to select the desired folder.
3.
Click Save to save the settings.

8.2 Configure System Settings

Follow the instructions below to configure System Settings, including Basic System Settings,
Maintenance, Security, and User Management, etc.

CONFIGURING BASIC INFORMATION

In the Basic Information interface, you can edit the Device Name and Device No.
Other information regarding the network camera, such as Model, Serial No., Firmware Version,
Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number of
Alarm Output is displayed. The information cannot be changed in this menu and should be used as
reference for future maintenance or modification.
1. Enter the Device Information interface: Configuration > System > System Settings > Basic
Information.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
USER MANUAL| VX-2S-CPIR-W
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents