Configuring Other Alarm - 3xLogic VX-2S-CPIR-W User Manual

3. Click Save to save the settings.

CONFIGURING OTHER ALARM

NOTE: Some cameras support Wireless Alarm, PIR (passive infrared sensor) Alarm or Emergency
Alarm.
Wireless Alarm
When a wireless alarm signal is sent to the camera from the detector, such as the wireless door
contact, the wireless alarm is triggered and a series of response actions can be taken.
Steps:
1. Enter the Wireless Alarm Settings interface:
Configuration > Advanced Configuration> Basic Event > Wireless Alarm
2. Select the wireless alarm number.
Up to 8 channels of external wireless alarm input are supported.
3. Check the checkbox of Enable Wireless Alarm to activate the wireless alarm.
4. Input the alarm name in the text field as desired.
5. Check the checkbox to select the linkage methods taken for the wireless alarm.
6. Click Save to save the settings.
7. Locate the external wireless device beside the camera, and go to Configuration > System > System
Settings > Remote Control to arm the camera and analyze the wireless alarm.
Figure 12-12
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Exception Settings
Figure 12-10
Setting Wireless Alarm
Figure 12-11
Configuring Wireless Alarm Settings
USER MANUAL| VX-2S-CPIR-W
94