Image Settings; Configuring Display Settings; Day/Night Auto-Switch - 3xLogic VX-2S-CPIR-W User Manual

11

Image Settings

Follow the instructions in this chapter to configure the image parameters, including Display settings,
OSD settings, Privacy Mask and Picture Overlay.

11.1 Configuring Display Settings

Purpose:
Configure the image adjustment, exposure settings, day/night switch, backlight settings, white
balance, image enhancement, video adjustment, and other parameters in display settings.
NOTE: The display parameters vary according to the different camera models. Please refer to the
actual interface for details.

DAY/NIGHT AUTO-SWITCH

Steps:
1. Enter the Display Settings interface: Configuration > Image > Display Settings.
Figure 11-1
2. Set the image parameters of the camera.
NOTE: In order to guarantee the image quality in different illumination environments, the camera
provides two sets of parameters for users to configure.
Image Adjustment

Brightness describes bright of the image, which ranges from 1 to 100.

Contrast describes the contrast of the image, which ranges from 1 to 100.

Saturation describes the colorfulness of the image color, which ranges from 1 to 100.

Sharpness describes the edge contrast of the image, which ranges from 1 to 100.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Display Settings of Day/Night Auto-Switch
USER MANUAL| VX-2S-CPIR-W
77