Starting Live View; Recording And Capturing Pictures Manually - 3xLogic VX-2S-CPIR-W User Manual

7.2 Starting Live View

In the live view window as shown in Figure 7-1, click
camera.
Icon
/

7.3 Recording and Capturing Pictures Manually

In the live view interface, click
trigger recording. Destination paths for captured pictures and clips can be set on the Configuration >
Local Configuration page. To configure remote scheduled recording, please refer to
NOTE: The captured image will be saved as JPEG file or BMP file to the defined destination path.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Live View Toolbar
Figure 7-2
Description
Start/Stop live view.
Self-adaptive window size.
Aspect Ratio: 4:3.
Aspect Ratio: 16:9.
Default aspect ratio.
Live view main stream.
Live view sub stream.
Live view third stream.
Third-party plugins: Click to choose an active third-party
plug-in. For IE (internet explorer) users, WebComponents
and QuickTime are available. For Non-IE users,
WebComponents, QuickTime, VLC or MJPEG are selectable
if they are supported by the web browser.
Manually take a stillshot.
Manually start/stop recording.
Audio on and adjust volume /Mute.
Engage two-way audio (multiple channels available on
applicable devices)
Turn on/off digital zooming function.
Table 5-1 Live View Toolbar - Descriptions
on the toolbar to capture live stillshots or click
USER MANUAL| VX-2S-CPIR-W
on the toolbar to start the live view of the
to manually
Section 13.1.
38