Table of Contents
Advertisement
10
Video/Audio Settings
Follow the instructions below to configure the video settings, audio settings, ROI, and Display info. on
Stream settings.
10.1 Configuring Video Settings
Steps:
1.
Enter the Video Settings interface: Configuration > Video/Audio > Video
2.
Select the Stream Type of the camera to main stream (normal), sub-stream or third stream.
NOTES:
For some models, to enable the third stream, go to System>Maintenance>System
Service> Software and check the checkbox of Enable Third Stream to reboot the system and
enable the third stream. The main stream is usually for recording and live view on networks with
abundant bandwidth and the sub-stream can be used for live view on networks where bandwidth
is limited.
12. To enable the third stream, go to System>Maintenance>System Service> Software and
check the checkbox of Enable Third Stream to reboot the system and enable the third
stream.
3.
You can customize the following parameters for the selected stream type.
Video Type: Set the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the Video Type is Video & Audio.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Video Settings
Figure 10-1
USER MANUAL| VX-2S-CPIR-W
72
- Quick Links:
- Camera Setup Options
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VX-2S-CPIR-W and is the answer not in the manual?
Questions and answers