Table of Contents
Advertisement
3. Select the start time and the end time for the switch timing.
4. Select the area by clicking the area No.
5. Slide the cursor to adjust the sensitivity and proportion for objects in the area during daytime.
6. Slide the cursor to adjust the sensitivity and proportion for objects in the area during night.
7. Set the arming schedule and linkage method as in normal configuration mode.
8. Click Save to save the settings.
CONFIGURING VIDEO TAMPERING ALARM
Purpose:
You can configure the camera to trigger an alarm when the lens is covered/obscured and also
configure certain alarm response actions when tampering is detected.
Steps:
1.
Enter the video tampering Settings interface, Configuration > Event > Basic Event > Video
Tampering.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Day/Night Scheduled-Switch
Figure 12-6
Video Tampering Alarm
Figure 12-7
USER MANUAL| VX-2S-CPIR-W
91
- Quick Links:
- Camera Setup Options
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VX-2S-CPIR-W and is the answer not in the manual?
Questions and answers