3xLogic VX-2S-CPIR-W User Manual page 52

2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable.
4. Set the IP Address Filter list.
Add an IP Address:
Steps:
a. Click the Add to add an IP.
b. Input the IP Address.
c. Click the OK to finish adding.
Modify an IP Address:
Steps:
a. Left-click an IP address from the filter list and click Modify.
b. Modify the IP address in the text filed.
c. Click the OK to finish modifying.
Delete an IP Address or IP Addresses.
a. Select the IP address and click Delete.
5. Click Save to save the settings.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
IP Address Filter Interface
Figure 8-16
Add an IP
Figure 8-17
Modify an IP
Figure 8-18
USER MANUAL| VX-2S-CPIR-W
52