Configuring Osd Settings - 3xLogic VX-2S-CPIR-W User Manual

11.2 Configuring OSD Settings

Purpose:
You can customize the camera name, time/date format, display mode, and OSD size displayed on the
live view.
Steps:
1. Enter the OSD Settings interface: Configuration > Image > OSD Settings.
2. Check the corresponding checkbox to select the display of camera name, date or week if
required.
3. Edit the camera name in the text field of Camera Name.
4. Select from the drop-down list to set the time format and date format.
5. Select from the drop-down list to set the time format, date format, display mode, OSD size and
OSD color.
6. Configure the text overlay settings.
a. Check the checkbox in front of the textbox to enable the on-screen display.
b. Input the characters in the textbox.
NOTE: Up to 8 text overlays are configurable.
7. Adjust the position and alignment of text frames.
13. Left align, right align and custom are selectable. If you select custom, you can use the
mouse to click and drag text frames in the live view window to adjust their positions.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
OSD Settings
Figure 11-6
USER MANUAL| VX-2S-CPIR-W
82