Quick Start; Adding Avx-2S-Cpir-W Camera To Vigil Utilities; Adding A Vx-2S-Cpir-W Camera To Vigil Client - 3xLogic VX-2S-CPIR-W User Manual

4

Quick Start

4.1 Adding a VX-2S-CPIR-W Camera to VIGIL Utilities

ADDING A VX-2S-CPIR-W CAMERA TO VIGIL CLIENT

Steps:
To interface a VX-2S-CPIR-W Camera with VIGIL Client:
1. Launch VIGIL Client (Local Mode only; VCM mode will only display Servers from a networked VCM
Server) and select Servers from the Servers top menu. This will launch the Servers window. VISIX V-
Series devices are considered edge recording devices and thus are recognized as their own VIGIL
Server within the VIGIL suite.
2. Click Add. This will deploy the Add/Edit VIGIL Server window.
3. Enable the Use VIGIL Connect option. If connecting using traditional network connection criteria is
desired, enter the cameras IP Address/DNS Name and confirm TCP/IP port status.
4. Enter in the VIGIL Connect alias of the desired VX-2S-CPIR-W Multi Sensor Camera (VIGILTest1 used
in the below example). Skip this step if using traditional network connection criteria (IP/Port).
5. Click Test VIGIL Connect to confirm the camera can be communicated with through the Connect
system using the provided alias. Skip this step if using traditional network connection criteria
(IP/Port).
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Adding V-Series Camera to VIGIL Client
Figure 4-1
USER MANUAL| VX-2S-CPIR-W
18