Assigning A Port Name; Configuring Web User Accounts - AudioCodes Mediant 1000B User Manual

User's Manual
Item #
10 Power Supply Unit 2 status indicator. See Item #8 for a description.
11 SWX LAN expansion module, providing 4 Ethernet ports operating in port-pair
group redundancy.
6.2.1

Assigning a Port Name

You can configure an arbitrary name or a brief description for each telephony port
displayed on the Home page. This description is displayed as a tooltip when you hover
your mouse over the port.
Note:

To add a port description:
1. Open the Home page.
2. Click the required port icon; a shortcut menu appears:
3. From the shortcut menu, choose Update Port Info; a text box appears:
4. Type a brief description for the port, and then click Apply Port Info.
6.3

Configuring Web User Accounts

Web user accounts define users for the Web interface and CLI. User accounts permit login
access to these interfaces as well as different levels of read and write privileges. Thus,
user accounts prevent unauthorized access to these interfaces, permitting access only to
users with correct credentials (i.e., username and password).
Each user account is based on the following:

Username and password: Credentials that enable authorized login access to the
Web interface.

User level (user type): Access privileges specifying what the user can view in the
Web interface and its read/write privileges. The table below describes the different
types of Web user account access levels:
User Level Representation in
Security
Administrator
Master
Version 7.0
Only alphanumerical characters can be used in the port description.
Table 6-9: Web User Access Levels and Privileges
Numeric
RADIUS
200 Read / write privileges for all pages. It can create all user
types and is the only one that can create the first Master
user.
Note: At least one Security Administrator user must
exits.
220
Read / write privileges for all pages. Can create all user
Description
Privileges
71 Mediant 1000B Gateway and E- SBC
6. Web-Based Management