Table of Contents
Advertisement
April 2009
Entering Mass Flow Parameters
To enter mass flow parameters in the Standard Volume/Mass
Flow option, press the [ ] arrow key until you reach the Mass
Flow tab, and then press
The screen appears similar to Figure 4-9 below. To step through
each parameter, press the [ ] key.
Settings
Mass Flow
Enabled
Calculation Method
Saturated Steam Input
Static Density
Figure 4-9: The Mass Flow Tab in the Standard Volume/Mass
1. The first prompt asks if you want to disable or enable the
Mass Flow option.
a. Use the [ ] and [ ] keys to scroll to the appropriate
radio button.
b. Press
[ENTER]
Note: If you select "Disabled," you cannot select any other
prompt in this window.
4-22
[ENTER]
to open the Mass Flow window.
Std Vol/Mass Flow
Mass Flow
Inputs
Static Density
Temperature
1.02305
Cancel
Flow Option
to confirm your selection.
Disabled
Kgs/m3
OK
Programming Site Data
Advertisement
Table of Contents
