Table of Contents
Advertisement
April 2009
Setting up a New Log (cont.)
General
Log Name 10SEC.LOG
Format
Type
Start Date/Time
End Date/Time
Logging Interval
Figure 8-5: The General Log Format Window
To step through each parameter, press the [ ] key.
1. The first prompt asks you to choose between a linear or
circular format for the log. (A linear log stops when it reaches
a specified end time or the PT878GC runs out of memory,
while a circular log runs continuously until manually
stopped.)
a. Use the [ ] and [ ] keys to scroll to the appropriate
radio button.
b. Press
[ENTER]
2. The next prompt asks you to choose whether the log is to be a
standard log, recording specified data, or an error log (one
which records error conditions).
a. Use the [ ] and [ ] keys to scroll to the appropriate
radio button.
b. Press
[ENTER]
8-6
Measurements
Linear
Standard
2004/11/01
2004/11/01
10
Cancel
to confirm your selection.
to confirm your selection.
Circular
Error
01:38:08
09:38:08
secs
Activate
Logging Data
Advertisement
Table of Contents
