Table of Contents
Advertisement
April 2009
The Battery Charger (cont.)
3. To condition the batteries, press the
"Condition Battery" window should now read "Stop." The
status line should change to "Discharging." (Updating the
status could take up to 30 seconds.)
Note: It is advisable to condition NiCad batteries when their run
time is reduced to 50% of their previous run time.
4. To stop the discharge cycle, press the
"Condition Battery" window reappears. The status now
changes to "On Charger."
5. Press
[F3]
, OK, to return to Operate Mode.
7-6
[ENTER]
key. The
[ENTER]
key and the
Programming Meter Settings
Advertisement
Table of Contents
