Table of Contents
Advertisement
April 2009
Setting Error Limits (cont.)
Note: For the velocity and acceleration boxes, the F1 softkey
toggles between English and metric measurements. Thus,
the key will always display the opposite measurement
from that which is currently active. Press
the measurement in the alternate format.
You have completed entering signal error limits.
•
[F2]
Press
(Cancel) to return to Operate Mode without
confirming the error limits, or
•
[F3]
Press
(OK) to confirm the new limits and return to Operate
Mode.
9-34
[F1]
to display
Servicing the PT878GC
Advertisement
Table of Contents
