Table of Contents
Advertisement
Windows NT4.0
For IR use, Windows NT4.0 requires installation of QuickBeam
software from Extended Systems (www.extendedsystems.com).
Desktop PCs and laptops without built-in IR ports also require
adding an IR dongle. While laptops with a built-in IR port
normally do not require a dongle, its addition might be necessary
in some cases.
Windows Me/98SE/98/95
The Windows 98SE and Me operating systems include IR
drivers. However, in most cases, the IR port has not been installed
or configured. From the Control Panel, click on Add New
Hardware and select Choose Device From List. Select Infrared
from the list and then select the appropriate infrared port, whether
built-in or external.
Note: In some instances, the infrared port must be enabled in the
BIOS of your PC. Consult your computer documentation,
manufacturer or MIS department. Assistance is also
available from the Microsoft Support Knowledge Base at
http://support.microsoft.com.
Establishing IR Communications with the PT878GC
April 2009
B-3
Advertisement
Table of Contents
