Table of Contents
Advertisement
April 2009
Entering User Functions (cont.)
3. The next prompt asks for the Units Symbol.
a. Press
[ENTER]
b. Repeat the procedure used for the Label (on the previous
page) to create the Units Symbol.
c. When you have completed the entry, press
confirm the symbol, or
without adding the symbol.
4. The next prompt asks you to select the number of decimal
places.
a. Press
[ENTER]
b. Scroll to the desired number of decimal places, ranging
from 0 to 4.
c. Press
[ENTER]
5. The final prompt asks for the function itself.
a. Press
[ENTER]
appears similar to Figure 4-23 on the next page.
b. Use the four arrow keys to scroll to the desired function or
table, and press
numeric keys to enter numeric values. Press
remove any mistaken or unwanted symbols or numbers.
Note: Pressing
of symbols and functions and a list of user functions. Use
both screens to create the desired function.
4-48
to reopen the text creation window.
[F2]
to open the drop-down menu.
to confirm the entry.
to open the function creation window, which
[ENTER]
to confirm each entry. Use the
[SEL]
causes the screen to alternate between a set
[F3]
(Cancel) to leave the window
Programming Site Data
(OK) to
[F1]
(Delete) to
Advertisement
Table of Contents
