Entering the Digital Output (cont.)
a. Press
[ENTER]
b. Scroll to the desired function.
c. Press
[ENTER]
Note: If you select Off, you will not be able to access any other
parameters in this option. If you select Test Points or Gate
Input, the program goes at once to Step 4.
2. The next prompt asks you to select the data source for the
digital output from a number of choices. If you select Pulse
Totalizer, the meter offers four sources:
•
Forward Totalizer
•
Reverse Totalizer
•
Standard Forward Totalizer
•
Standard Reverse Totalizer
If you select Frequency, the sources also include:
•
Pressure
•
Diagnostics
•
Velocity
•
Temperature
•
Volume
•
User Function
•
Skan/Measure
•
Mass Flow
a. Press
[ENTER]
shown in Figure 4-19 on page 4-40.
b. Scroll to the desired source.
c. Press
[SEL]
Programming Site Data
to open the drop-down menu.
to confirm your selection.
to open the data source selection window,
to confirm your selection.
April 2009
4-43