Table of Contents
Advertisement
Entering Skan/Correlation Parameters (cont.)
2. Repeat step 1 to enter the maximum percentage of peak.
3. The next prompt asks for the Percent of Peak, which is used to
calculate the transit times and Delta-T.
a. Press
[ENTER]
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
4. To select (or deselect) Measure Times only (instead of both
Skan and Measure times), press
prompt.
Pressing the [ ] key returns the meter to the Min Threshold
entry, and pressing the [
tab.
•
To confirm the entries and return to Operate mode, press
(OK).
•
To leave the window without confirming the entries and return
to Operate mode, press
Programming Site Data
to enter the text box.
to confirm the entry.
[ENTER]
] key returns the meter to the Correlate
[F2]
(Cancel) or the
April 2009
at the Measure Only
[ESC]
key.
[F3]
4-33
Advertisement
Table of Contents
